How do you choose a custom wall charger people will actually use?
According to a study by the Advertising Specialty Institute, a promotional products industry association, usefulness is the main reason people hold on to a promotional item: 78% of American consumers surveyed would keep one because it's useful [1]. For a charger, useful means safe, compatible and powerful enough.
Start with a certification mark on the charger itself
In Quebec, electrical equipment can't be sold unless it's approved, meaning it carries the seal of an accredited certification body [2]. When Health Canada assessed 50 imported USB wall chargers in 2023-2024, 32 showed no compliance issues, but 17 were recalled [3]. Non-compliant chargers can pose shock, burn and fire hazards [4].
With your quote, ask for the mark of a certification body recognized in Canada; the Régie du bâtiment du Québec (RBQ) publishes the list [5]. The mark must be on the product itself, not just the packaging [6]. Per the RBQ, equipment certified for Canada usually shows a "c" on the seal; otherwise, compliance is to be confirmed with the certifier [2]. The RBQ also describes the warning signs of counterfeit equipment [7].
USB-C, USB-A or both?
According to one distributor, USB-A still has a place given how many devices continue to use it [8]. Manufacturer Plugable notes that some high-end phones only reach their top charging speed on a PPS-compatible USB-C charger, while other phones still charge on it [9].
When you know what your employees carry, USB-C Power Delivery is often a sensible default; at a trade show with unknown visitors, pairing USB-A with USB-C leaves fewer people stuck. Whether a cable is included is to be confirmed with your quote.
Read the wattage port by port
According to a charging accessories manufacturer, the wattage printed on a multiport charger is a total shared across the ports, not what each port delivers [10]. Its rough benchmarks: 20 W or more for a phone, around 30 W for a tablet and about 65 W for a laptop [10]. The USB Power Delivery specification covers several power levels, up to 240 W [11], so a "PD" label alone won't tell you how much power the charger delivers; check that it suits a laptop. Size for the most demanding device and ask what one port delivers when the others are busy. For travel, the FAQ covers two more points: the voltage range printed on the charger [14] and the size-versus-price trade-off of GaN chargers [15].
A logo built for a small surface
One distributor notes that the method depends on the material and the printable area [8]. Two distributors agree that pad printing suits small, curved surfaces with few colours, digital printing allows full colour on flatter surfaces, and laser engraving gives a tone-on-tone mark that works best on metal or anodized parts [8][12]. Skip fine text and detailed patterns [12] and plan a simplified version of your logo. How well the imprint holds up with use is to be confirmed. One distributor charges setup per colour and per location [13], so fewer colours can ease the budget.
Écran Blanc's advice
Start with the devices your recipients use, choose the ports and the power per port, then the style. Ask for the certification mark to be confirmed along with the price, and when you review the proof, check that your simplified logo stays legible.