Custom gloves: how do you choose gloves people will actually wear?
A logo on a glove only gets noticed if the gloves get worn. Three decisions come first: the type of glove, a version of your logo that works on a small area, and a decoration method that suits the material.
Gloves or mittens? Start with how they'll be used
For work that doesn't call for fine finger movement, the Canadian Centre for Occupational Health and Safety (CCOHS) recommends gloves below 4°C for light work and below -7°C for moderate work, and mittens below -17°C [1]. In practice, for employees handling parcels or tools, mittens get in the way; for an event where people stand around in the cold, they're the warmer choice.
CCOHS's glove selection chart lists cotton among materials for cold [2], but its fact sheet on working in the cold advises against it: cotton loses its insulating value once damp, while wool and synthetics keep holding heat when wet [1]. For snow or wet conditions, go with wool or a synthetic.
A logo built for a small surface
According to one distributor, the logo on a glove goes on the back of the hand or at the wrist [3]. An embroidery blog's guide to stitching on knits explains that stretchy areas such as the wrist band suit small designs better [4]. A machine embroidery blog adds that embroidered designs on gloves need to stay small, and that a scaled-down design has fewer stitches [5]. So plan on a standalone symbol or a short name rather than a horizontal logo with a tagline.
Pick the glove before the decoration method
Distributors offer embroidery, screen printing, full-colour printing, embossed patches and engraving on gloves [3][6][7]. The sources consulted don't compare how these methods stand up to washing and wear, so ask what any durability claim is based on. Choose the glove first, then use this rule of thumb: on a knit that stretches, a small, simple design [4]; on leather or a stiffer synthetic, have your quote confirm the possible methods and the area.
Touchscreen fingertips: a bonus, not the main selling point
Several forum participants report touchscreen tips that don't work, or that stop working over time [8]. According to a consumer technology site, the conductive areas are usually at the tip of the index finger and thumb, and often the middle finger too [9], something worth pointing out to recipients. Put warmth and the logo first.
Sizes and fees: getting the order ready
CCOHS calls for gloves that fit properly [2], and a blogger who has tried many work gloves notes that the same size from the same brand can fit very differently [10]. For a team wearing them every day, plan a breakdown by size; for an event giveaway, a stretch knit often makes distribution simpler.
According to one distributor's FAQ, setup charges (plate, screen or template) and matching an exact PMS (Pantone) colour may be added to the unit price [11]. To compare two prices fairly, ask for a quote that spells out the method, the colours and the placement.
Écran Blanc's advice
Start by describing who will wear the gloves, where and for what task: that's what decides between gloves and mittens, and between materials. Then prepare a compact version of your logo and check its placement on the proof.