Custom travel mugs: which one should you give clients or your team?
Before the logo, picture how the mug will be carried, washed and used: those answers point you to the right lid, insulation and decoration.
Bag, car or desk: start with the lid
A UK consumer association tests for leaks by opening and closing the lid 100 times, then turning the mug upside down and shaking it: some mugs leak even when sold as leak-resistant [1], a common flaw according to an online magazine [11]. In a review site's comparison, a mug advertised as leakproof leaked noticeably once shaken or tipped [2]. So ask whether a mug stays sealed when closed and tossed in a bag, or is only splash-resistant.
For commuters or field crews, favour a locking lid to reduce the risk of spills; at the office, a simple lid is often enough.
Engraving or ink: let your logo decide
Laser engraving removes the surface layer: on powder-coated stainless steel (a coloured finish), the logo comes out silver (tone-on-tone on bare steel), with no gradients or photos [4]. According to a distributor and a tumbler decorator, it ranks among the most dishwasher-resistant decorations since no ink is involved [4][5] (to be confirmed: no independent test found).
If exact brand colours matter, screen printing allows a few solid colours (spot colours) and Pantone matching [4]; according to a distributor, standard inks wear down with repeated dishwasher cycles [4], and one decorator recommends hand washing [5]. Sublimation requires a polymer coating (a surface that takes the ink), which rules out standard powder coat [5][6]; according to a distributor, it can't print white [6], and a decorator notes it looks washed out on dark backgrounds [5]. Choose the mug colour and the decoration method together.
Insulation and budget: who is the mug for?
The same association measures heat retention in travel mugs over eight hours, twice the period used for reusable cups [1]; in the comparison cited above, retention varied widely from one mug to the next [2]. According to a distributor, metal insulates better than plastic, which is often more affordable [3]; another suggests a higher-end insulated item to thank promising prospects [7]. Insulated steel lends itself to a corporate gift; plastic can work for a wide giveaway.
A lid that's easy to clean stays in use
Coffee residue trapped under the gasket or in a sliding mechanism can give the next cup a stale taste [8]; a product-testing outlet advises taking the lid apart, washing the parts in hot soapy water and drying them thoroughly [9], so favour a lid that comes apart easily. According to manufacturer Thermos, most of its products can go on the top rack of the dishwasher, but it recommends hand washing to protect the finish [10]: pass along the care instructions for both the mug and the decoration to recipients.
Contrast and imprint area
According to a distributor, a light imprint stands out on a dark mug and vice versa, and decorating two sides generally costs more [3]. Imprint areas differ from one shape and brand to another [5][6]: lay out your logo on the template of the mug you choose.
Écran Blanc's advice
Let the commute pick the lid, then let the logo pick the decoration. One colour and frequent washing: engraving on steel is often simplest. Strict brand colours: ink, with hand-washing instructions handed out with the mug.